SHEET STAMPING CRANK PRESSES

Additional information: Deputy Chief Design Engineer of Ore-Mining and Press-Forging Equipment Production Unit Martynenkov Sergey Leonidovich phone: +38 (0626) 47-82-38
Deputy Chief press-forging equipment production unit Vinnichuk Sergey Vladimirovich phone: +38 (0626) 47-88-73
E-mail:kgro@nkmz.donetsk.ua
fax:+38(0626)47-15-49
  Closed die sheet stamping crank presses are designed to produce sheet stampings by blanking, bending, forming, punching and drawing of the large-sized elongated parts used in the motor car, tractor and instrument making industries as well as to make refrigerators and other household utensils. Sheet stamping crank presses

 

DOUBLE-ACTION SHEET STAMPING PRESSES
Parameters Values
4K500 4KA500 4KB600
 Rated force, mm: 5000 5000 5000
 Slide stroke, mm: 630 630 630
Continuous stroke frequency, min-1 12 to 24 12 to 24 12 to 24
Single slide stroke frequency, min-1 18 18 18
Closed die space height, mm 1250 1230 1220
Setup distance between die plate and slide 500 500 500
Table size, mm:
  - left-to-right 3150 3150 3150
  - front-to-back 1800 2100 2100
Slide size, mm
  - left-to-right 1800 3150 3150
  - front-to-back 1950 2100 2100
Chuck stroke, mm:
  - full 300 - -
  - operating 150 - -
Post opening size, mm:
- width 1900 1900 1900
- height 1900 1900 1900
Slide pusher force, kN 80 80 80
Main drive motor:
- power, kW 110 110 110
- rotational speed, rpm 1500 1500 1500 Overall size, mm: - left-to-ring 5000 5320 5000 - front-to-back 4555 4555 4555 Press height above floor level, mm 7550 7590 7590 Total press height, mm 10830 9870 9870 Press weight, ton 173 159 155 Table motion Along front edge On front edge -

 

SINGLE-ACTION PRESSES
Parameters Values
2-Crank Presses 4-Crank Presses
2K1000 2K500 2K315 4K500 4KA500 4KB500
Rated force, kW 10000 5000 3150 5000 5000 5000
Slide stoke, mm 400 630 400 630 630 630
Continuous slide stroke frequency, min-1, no less that 20 20 25 12 to 24 12 to 24 12 to 24
Single slide stroke frequency, min-1 16 16 19 18 18 18
Closed die space height, mm 810 920 570 1250 1230 1220
Setup distance between die plate and slide 320 500 250 500 500 500
Table size, mm:
  - left-to-ring 3150 3150 2500 3150 3150 3150
  - front-to-back 1800 1370 1250 1800 2100 2100
Slide size, mm:
  - left-to-ring 3100 3150 2500 1800 3150 3150
  - front-to-back 1700 1370 1000 1950 2100 2100
Chuck stroke, mm:
  - full 200 300 170 300 - -
  - operating 100 200 150 150 - -
Post opening size, mm:
  - width 1900 1900 750 1900 1900 1900
  - height 1500 1900 400 1900 1935 1935
Slide pusher force, kN 500 250 160 80 80 80
Main drive motor:
  - power, kW 132 90 50 110 110 110
  - rotational speed, rpm 1000 1500 1400 1500 1500 1500
Overall size, mm:
  - left-to-ring 5150 5000 4510 5000 5320 5000
  - front-to-back 4700 4555 2740 4555 4555 4555
Press height above floor level, mm 7830 7550 5900 7550 7590 7590
Total press height, mm 11400 10800 6870 10830 9870 9870
Press weight, ton 190 130 52 173 159 155
Table motion front wise front ward front ward front wise front ward -