E-mail Home

 

HYDRAULIC CAR LIFTS

ERECTING HYDRAULIC CAR LIFT
MGP-28.03/MGP-28.04
  The customer's requirements and the relevant field experience of operating similar equipment were taken into account when designing this machine.
MGP-28.04
TECHNICAL DATA
Parameters Type of car lifts
MGP-28.03 MGP-28.04
Max. lift height, m 28
Max. cradle lifting capacity, kg 300
Max. telescoping length, m 18
Support outline size, m 5,5 × 5,6
Cradle lifting time (from a parking level up to the max. height), s 300
Hydraulic pressure, MPa (kgp/cm) 16 (160)
Type of hydraulic pump: NSh-32-3 NSh-32M-4P
Hydraulic pump output, l/min 68,6
Max. travelling speed, km/hr:
  - by asphalt-paved roads 50
  - by dirt roads 30
Transportation load, kN (tp):
  - on front axle 62 (6,2) 47 (4,7)
  - on rare axle 2×74 (2×7,4) 2×72 (2×7,2)
Supply voltage, V 3-phase a.c. 380 V, 50 Hz
Motor power, kW 18
Overall size (in a haulage state), mm:
  - height 10500 10500
  - width 2720 2500
  - length 3980 3950
Overhead equipment weight, kg 10370 9900
Total weight, kg 21000 19100
Car undercarriage KrAZ-260G KrAZ-65101
Wheel arrangement 6 × 6 6 × 4

 

FIRE-FIGHTING HYDRAULIC CAR LIFT
APGP 30/20
APGP-30/20
TECHNICAL DATA
Max. lifting capacity, kg (N) 300 (3000)
Max. lift height, m 30
Max. telescoping length, m 20
Structural weight, ton 24,8
Swing section turning angle, deg 360
Fire main feed pressure, kgp/cm (MPa) 10 (1)
Cradle lift time (up to the max. height), s 300
Operating temperature range, °C -40 ... +40
Overall size in a travelling position. m
  - length 10,5
  - width 2,5
  - height 3,94
Car undercarriage KrAZ-65101
Travel motor power, kW 176,5
Wheelbase, mm 4880
Track, mm:
  - front wheels 1970
  - rear wheels 1835
Road clearance, mm 275
Max. travelling speed, km/hr:
  - by asphalt-paved road 50
  - by dirt roads 30
Transport load, ton:
  - on front axle 5900